100° Digital thermometer °С/°F 

• Measurement temperature range: -50°C-+50°C (-58°F +122°F)
• Resolution: 0.2°C (°F)
• Accuracy: ±1°C (°F)
• Supply voltage 1.5V
• Measurement cycle 1, 3, 5 & 10 seconds (on default– 10 seconds)
• Measuring  RC-oscilator  with external resistor & capacitor
• 32 kHz clock RC-oscilator with build-in capacity
•  Serial interface
• Build-in circuit of non-linear digital correction
• 3.5 digit  LCD with double multiplex

Medical thermometer 

• Supply voltage 1.5V
• Measurement temperature range: +32.00°C ~ +43.00°C
• Accuracy: ±0.1°C
• Resolution:  0.01°C
• Selftesting
• Alarm signal
• Storage of measurements results (highest temperature)
• Automatic switch-off after  8 min 40 sec
• One button on/off switching 

Digital thermometer

• Measurement temperature range: from 32 to 42°C (from 89.6 to 107.6°F)
• Measurement accuracy ±0.05°C – for range from 35 to 38°C, ±0.1°C – for ranges from 32 to 35°C & from 38°C to 42°C
• Resolution: 0.0025°C
• RC-oscillator with own frequency 32.32kHz (external resistance) with adjustment function
• Build-in LCD driver circuit 3COM x 11SEG, 1/3 duty, 1/2 bias

Integrated circuit of digital sensor-measurer of temperature for industrial temperature range

• Measurement temperature range:  from -55°C to +125°C
• Temperature value is converted to 12-bit digital code
• Accuracy of temperature indication can be programmed by customer form 9 to 12 bit
• Alarm signal for case of temperature excess of threshold values determined (programmed) by customer
• Unique 64-bit serial number for each IC, not available for changes by customer
• Data read/write operation from memory of IC, 1-wire interface of data transfer

Integrated circuit of digital sensor-measurer  of temperature for industrial temperature range

• Measurement temperature range:
  from -55°C to +125°C
• Temperature value is converted to 12-bit digital code
• Accuracy of temperature indication  can be programmed by customer form 9 to 12 bit
• Alarm signal for case of temperature excess of threshold values determined (programmed) by customer
• Unique 64-bit serial number for each IC, not available for changes by customer
• Data read/write operation from memory of IC,1-wire interface of data transfer